Arrival of Lotte
Programming level 1
Simple bus
P1
How to build
Build a bus
- Static figures, lots of little girls, including 2 similar to build
- The bus door opens on the axle. The bus is equipped with 1 DC motor, it rolls automatically when the battery holder is switched on
P1
Build a bus
P1
Programming level 2
Arrival of Lotte
P2
How to build
Build programmable Bus
a) We build a bus similar to P1, but here the robot is programmable.
- 2 DC motors and 1 Buzzer are connected to the robot.
- After the bus is switched on, it beeps with Buzzer, then follows a pre-programmed route and finally stops.
- We build the little girls like in -P1.
b) We connect 2 little girl figures and 1 Touch sensor to a common mother board.
- The little girls have LEDs in place of their eyes, their heads are mounted on servo motors.
- When the touch sensor is pressed, the two little girls look at each other, the 2-2 LEDs in their eyes flash and then turn away from each other.
P2
a) Build programmable Bus
b) Build programmable Bus
P2
P2
Programming level 3
Angry girls
P3
How to build
Build Luise
- The bus is built in the same way as P2, but the door opens with a servo motor.
- We build Luise in the same way as P2. Her eyes are LEDs, her head is attached to a servo motor and 1 IR photoreflector is attached.
- The bus rolls, the IR photoreflector detects that it has reached the little girls, then it stops, and the door opens with a servo motor, revealing Lotte. Lotte’s head is 1 LED which flashes 3 times when the door opens.
- Luise has an IR photoreflector mounted on her which detects the bus, her eyes flash 3 times and then she turns her head.
P3
Angry Girls
P3
P3
Programming level 4
lot of stuff is taken out of the bus
P4
How to build
Bus
- Only one side of the bus is built.
- 2 IR photoreflectors, 2 servo motors, 1 DC motor are connected to it.
- The door in the middle opens with servo motor when the bus driver figure is placed in front of the IR photoreflector.
- A rail is built behind the bus wall, moved by gears mounted on a DC motor on a rack. The children’s belongings appear in the doorway on this track.
- Another IR photoreflector monitors the luggage, when it detects one, it sets in motion a servo motor-mounted lever that pushes the luggage out the bus door.
P4
Bus
