The red flower

P1

P2

P3

P4

Programming level 1

Mowgli gets the fire

P1

How to build

Sparks in the hut

• The hut, Mowgli and the environment are built on a common board, connected to a robot.
• There are 1-1 red LED in the window of the hut and in Mowgli's hand. Mowgli's arms can be moved with an axle.
• When the robot is switched on, the LEDs are automatically switched on. The flashing LEDs represent the fire.

P1

Sparks in the hut

Previous

Next

P1

P1

Sparks in the hut

to the top of the page

Programming level 2

Mowgli goes down to the village

P2

How to build

Mowgli goes down to the village

• The hut and Mowgli are built on a separate robot.
• The hut is a static robot with 2 LEDs flashing in the window. The program is triggered by a Touch sensor.
• Mowgli has 1 red LED in his hand, but his arms move with an axis. The figure is mounted on a robot base with 2 DC motors.
• When switched on, the robot starts automatically.
• Mowgli's path can be pre-drawn or marked out with landmarks. The aim is for the robot to follow the predefined path as accurately as possible. The robot does this even without a sensor, by setting and experimenting with the program's precise values by the children.
• When the robot reaches the entrance to the hut, the LED starts blinking

P2

Mowgli goes down to the village

Previous

Next

P2

P2

Mowgli

House

to the top of the page

Programming level 3

Remote control robot - Mowgli steals the fire

P3

How to build

Remote control robot - Mowgli steals the fire

• The hut and the little boy guarding the fire are static robots, each connected to a separate robot.
• The hut is like in P2.
• The little boy robot has 1 LED, 1 Buzzer and 1 Touch sensor connected to it.
• LED flashing in front of the boy guarding the fire and the Buzzer sound indicates the fire.
• When Mowgli presses the Touch sensor, the LED goes out and the Buzzer stops.
• Mowgli is mounted on 2 robotic bases with DC motors.
• Its arm is moved by servo motor and 1 red LED is connected to it.
• The robot is controlled by a console with 5 Touch sensors. 4 Touch sensors are used for control.
• When the 5th Touch sensor is pressed, Mowgli's arm rises up and then snaps down, pushing down the Touch sensor mounted on the little boy guarding the fire.
• The LED in Mowgli's hand will then light up, indicating that he has been touched by the fire.
• The hut and the little boy guarding the fire are static robots, each connected to a separate robot.
• The hut is like in P2.
• The little boy robot has 1 LED, 1 Buzzer and 1 Touch sensor connected to it.
• LED flashing in front of the boy guarding the fire and the Buzzer sound indicates the fire.
• When Mowgli presses the Touch sensor, the LED goes out and the Buzzer stops.
• Mowgli is mounted on 2 robotic bases with DC motors.
• Its arm is moved by servo motor and 1 red LED is connected to it.
• The robot is controlled by a console with 5 Touch sensors. 4 Touch sensors are used for control.
• When the 5th Touch sensor is pressed, Mowgli's arm rises up and then snaps down, pushing down the Touch sensor mounted on the little boy guarding the fire.
• The LED in Mowgli's hand will then light up, indicating that he has been touched by the fire.
• The hut and the little boy guarding the fire are static robots, each connected to a separate robot.
• The hut is like in P2.
• The little boy robot has 1 LED, 1 Buzzer and 1 Touch sensor connected to it.
• LED flashing in front of the boy guarding the fire and the Buzzer sound indicates the fire.
• When Mowgli presses the Touch sensor, the LED goes out and the Buzzer stops.
• Mowgli is mounted on 2 robotic bases with DC motors.
• Its arm is moved by servo motor and 1 red LED is connected to it.
• The robot is controlled by a console with 5 Touch sensors. 4 Touch sensors are used for control.
• When the 5th Touch sensor is pressed, Mowgli's arm rises up and then snaps down, pushing down the Touch sensor mounted on the little boy guarding the fire.
• The LED in Mowgli's hand will then light up, indicating that he has been touched by the fire.
• The hut and the little boy guarding the fire are static robots, each connected to a separate robot.
• The hut is like in P2.
• The little boy robot has 1 LED, 1 Buzzer and 1 Touch sensor connected to it.
• LED flashing in front of the boy guarding the fire and the Buzzer sound indicates the fire.
• When Mowgli presses the Touch sensor, the LED goes out and the Buzzer stops.
• Mowgli is mounted on 2 robotic bases with DC motors.
• Its arm is moved by servo motor and 1 red LED is connected to it.
• The robot is controlled by a console with 5 Touch sensors. 4 Touch sensors are used for control.
• When the 5th Touch sensor is pressed, Mowgli's arm rises up and then snaps down, pushing down the Touch sensor mounted on the little boy guarding the fire.
• The LED in Mowgli's hand will then light up, indicating that he has been touched by the fire.
• The hut and the little boy guarding the fire are static robots, each connected to a separate robot.
• The hut is like in P2.
• The little boy robot has 1 LED, 1 Buzzer and 1 Touch sensor connected to it.
• LED flashing in front of the boy guarding the fire and the Buzzer sound indicates the fire.
• When Mowgli presses the Touch sensor, the LED goes out and the Buzzer stops.
• Mowgli is mounted on 2 robotic bases with DC motors.
• Its arm is moved by servo motor and 1 red LED is connected to it.
• The robot is controlled by a console with 5 Touch sensors. 4 Touch sensors are used for control.
• When the 5th Touch sensor is pressed, Mowgli's arm rises up and then snaps down, pushing down the Touch sensor mounted on the little boy guarding the fire.
• The LED in Mowgli's hand will then light up, indicating that he has been touched by the fire.
• The hut and the little boy guarding the fire are static robots, each connected to a separate robot.
• The hut is like in P2.
• The little boy robot has 1 LED, 1 Buzzer and 1 Touch sensor connected to it.
• LED flashing in front of the boy guarding the fire and the Buzzer sound indicates the fire.
• When Mowgli presses the Touch sensor, the LED goes out and the Buzzer stops.
• Mowgli is mounted on 2 robotic bases with DC motors.
• Its arm is moved by servo motor and 1 red LED is connected to it.
• The robot is controlled by a console with 5 Touch sensors. 4 Touch sensors are used for control.
• When the 5th Touch sensor is pressed, Mowgli's arm rises up and then snaps down, pushing down the Touch sensor mounted on the little boy guarding the fire.
• The LED in Mowgli's hand will then light up, indicating that he has been touched by the fire.

P3

Remote control robot - Mowgli steals the fire

Previous

Next

P3

Remote control robot - Mowgli steals the fire

P3

Mowgli

House

Little boy

to the top of the page

Programming level 4

Cooperative Robots - Mowgli steals the fire

P4

How to build

Cooperative Robots - Mowgli steals the fire

• The hut and the little boy guarding the fire are static robots, each separately attached to a robot.
• The hut as in P2 and P3.
• The LED blinking in front of the boy guarding the fire and the Buzzer's voice are the same as in P3.
• There is 1 IR Photoreflector attached which detects Mowgli's approach. When Mowgli mounted on the carriage gets close enough, the LED goes out and the Buzzer stops.
• Mowgli is built as in P3.
• At the front of it, 1 IR Photoreflector is attached, which detects the little boy guarding the fire.
• Mowgli automatically moves forward, when it gets close to the little boy, raises the Servo motorized hand, the LED built into the hand lights up, displaying that the fire is taken, then moves away from the little boy guarding the fire, with the LED lit.

P4

Cooperative Robots - Mowgli steals the fire

Previous

Next

P4

Cooperative Robots - Mowgli steals the fire

P4

Mowgli

Little boy

to the top of the page